Manufacturing Today

How Electric Vehicle Body Materials Affect Antenna Performance

Industry Guide November 17, 2026
How Electric Vehicle Body Materials Affect Antenna Performance

Electric vehicles have introduced a set of antenna engineering challenges that didn’t exist — or existed in milder forms — with conventional steel-bodied cars. The shift toward aluminum body panels, the growing use of carbon fiber reinforced polymer in structural and aesthetic components, and the elimination of traditional roof structures in some designs all affect how RF signals pass into and out of the vehicle. For GNSS and telematics systems that depend on reliable signal reception, understanding these material interactions is not an abstract concern — it’s what determines whether a system performs as specified or generates reliability problems in the field.


Steel versus aluminum: a less obvious difference than it looks

Traditional automotive bodies use steel for body panels, which is a good RF reflector. Antennas mounted on a steel roof benefit from the roof acting as a ground plane — the large conductive surface enhances the antenna’s radiation pattern and improves gain toward the sky, which is exactly the direction a GNSS antenna needs to receive signals from.

Aluminum, used extensively in electric vehicle bodies for weight reduction, is also conductive, but its electrical properties differ from steel in ways that affect antenna ground plane performance. The conductivity of aluminum is higher than steel, which is generally beneficial for antenna ground plane function. However, aluminum’s lower magnetic permeability means that the RF ground plane behavior is not identical, and antenna systems tuned for a steel ground plane may need adjustment when migrating to an aluminum platform.

The more practical concern with aluminum bodies is the connection quality between panels. Aluminum oxides rapidly when exposed to air, and the oxide layer is non-conductive. If aluminum panels are joined without ensuring good electrical continuity across the joints — a common quality issue in some manufacturing approaches — the ground plane becomes discontinuous, which introduces resonances and signal irregularities that affect antenna performance unpredictably.

Carbon fiber: the RF opacity problem

Carbon fiber reinforced polymer is used in electric vehicles for structural components, body panels, and in some cases roof sections. Carbon fiber has properties that make it valuable structurally — high strength-to-weight ratio, stiffness — and properties that make it problematic from an RF standpoint: it is electrically conductive.

A carbon fiber roof panel attenuates RF signals passing through it. The degree of attenuation depends on the fiber orientation, the fiber volume fraction, and the number of layers in the layup. A typical structural carbon fiber panel attenuates signals in the GNSS frequency bands by 10–20 dB, which is enough to severely degrade GNSS performance for an antenna mounted inside the vehicle or underneath the carbon fiber surface.

The standard solution is to route antenna cables to a mounting location where the antenna has a clear view of the sky without carbon fiber between it and the GNSS satellites — typically a small antenna aperture through the roof, or mounting on a section of the body that uses a different material. This requires planning at the vehicle design stage; retrofitting an antenna to a carbon fiber roof involves either an aperture that compromises the structural integrity of the panel or accepting the signal loss.

Glass roofs and panoramic sunroofs

Many electric vehicles use large glass roof panels for aesthetic and interior space reasons. Glass is essentially transparent to RF signals at GNSS frequencies, which makes it an excellent alternative to carbon fiber from an antenna perspective. GNSS antennas mounted on the interior surface of a glass roof receive signals with minimal attenuation — the glass loss at 1.5 GHz is typically less than 1 dB.

The complication is that automotive glass often includes metallic elements: heating elements embedded in rear windows, antenna elements for AM/FM embedded in windshields, and in some cases metallic oxide coatings used for solar control or defrost functions. These metallic elements in the glass can create localized attenuation or introduce interference with GNSS signals depending on their geometry and proximity to the GNSS antenna.

A glass roof with metallic heating filaments running across it is not fully transparent to RF — the filaments create a grid that partially blocks signals, particularly at the frequencies where the grid spacing is resonant. For a GNSS receiver inside a vehicle with heated glass roof panels, the signal level and consistency can be worse than expected from a nominal glass material.

The vehicle integration challenge for telematics

Electric vehicles are designed with integrated telematics systems as a primary feature, not an afterthought, and their antenna systems reflect this. The Automotive Telematics Antennas in EV platforms are typically designed specifically for the vehicle’s material construction, with mounting locations and cable routing that account for the specific attenuation characteristics of the body materials around them.

This tight integration creates challenges for aftermarket additions or for fleet operators adding supplemental tracking or telematics equipment to vehicles that weren’t designed around those requirements. An aftermarket GNSS tracker installed inside a carbon fiber-roofed EV will not perform comparably to the same tracker installed in a conventional steel-roofed vehicle. The signal environment is fundamentally different.

External antenna mounting — placing the antenna on the exterior of the vehicle where it has a direct view of the sky without body material in the path — is the reliable solution for aftermarket GNSS applications on EV platforms with problematic roof materials. The tradeoff is the installation complexity of routing cables from an exterior mounting point to the interior electronics, and the need for a weatherproof antenna designed for exposed mounting.

Active antenna designs and their role in EV applications

Active GNSS antennas — which include a low-noise amplifier (LNA) in the antenna housing — compensate for signal loss in the cable run and in the mounting environment by amplifying the received signal before it travels to the receiver. In a standard installation, the signal level at the receiver input determines whether the receiver can achieve a reliable lock. An active antenna provides a signal level margin that allows the system to maintain performance even when the installation has unavoidable signal loss.

For EV applications where complete avoidance of carbon fiber or metallic glass elements may not be possible, an active antenna designed for the specific installation geometry — with a gain specification that accounts for the expected path loss through the vehicle’s materials — can maintain acceptable GNSS performance in locations that would be problematic for a passive antenna.

The selection criterion is matching the antenna’s LNA gain to the actual signal loss in the installation, neither over-amplifying (which introduces noise into the receiver chain) nor under-amplifying (which leaves the receiver signal-limited). This requires knowing the actual attenuation through the vehicle’s material stack, which ideally comes from measurement at the specific installation location rather than from material specification sheets.